Log Home Preservation Methods - Borate Wood Preservatives

Log Home BorateTreatments - the options and how and when to use!

One of the most important ways to protect your investment, your home, is to use a wood preservative on your logs. There are only two times that you can effectively use these products on your logs. When the home is built, before it is stained, or after cob blasting a finish off of your logs, before you re-stain. The wood preservative must be applied to raw wood, so it can soak in and dry underneath the stain.

All wood faces the possibility of rot and insect infestation, even in dry climates. Fungi and insects actually consume the cells of dead wood, often causing severe structural damage that often requires log replacement-a costly repair. We use Penetreat to help protect your home from costly damage of rot and insect infestation. Penetreat is a borate based wood preservative. Borates are well known across the world for their protective qualities. Penetreat provides a protective "shell" coating which helps defend your home against dry, wet, and brown rot, as well as termites, house borers, powder post beetles, and carpenter ants, (to name a few).

Borate is not toxic to people and animals. It will not harm you or your pets. Borates do not affect the natural color or strength of wood. They are completely odorless, and are not corrosive to metal fasteners, nails or screws. When a "Penetreat" home is properly sealed against moisture, the borates can provide many years of effective protective.

Impel Rods are a highly concentrated solid form, water diffusible borate rod. They are ideal for both preventative treatments of high risk areas and remedial treatments in areas with existing decay. Because Impel Rods stop decay when properly used, there is no need to replace decay damaged, yet structurally sound logs! Decay prone and rot hot spot areas at greatest risk include: base logs, corner construction, exposed rafters or overhangs, and below windows, doors, and dormers.

Impel Rods depend on moisture to work. When moisture contents of wood reach levels suitable for decay attack, i.e. (around 25 percent) Impel Rods slowly dissolve and begin to diffuse throughout the moisture saturated wood. The preservative will migrate into the areas of highest moisture, which are at the highest risk from fungal decay. The diffused Impel Rod will adequately and effectively prevent the wood from rotting and decaying because it will not allow the fungus that causes rot to grow. When moisture levels drop below 25 percent, the preservative becomes dormant and provides a reserve, ready to reactivate should decay conducive conditions reoccur. We feel that Impel Rods are an essential part of the protection of your log home, and include them as part of our prevention and restoration system.

We hope this article has been helpful and look forward to giving you much more information in future articles to help you preserve your log home dream!

Jamie Fonder

Top-Coat Log Home Restoration LLC

http://topcoatloghomerestoration.com/

Patio Roof Designs - Find a Unique Look to Fit With Your House

No ideal home is complete without a beautifully designed patio. This is a paved area outside the house, commonly for relaxation, dining, and good conversation, listening to music, drinks and other recreational activity. A patio is best covered, so as to be suitable for all seasons. Besides, roofing adds much beauty to the patio. Patio roof come in many shapes and designs. Here are some great ideas for your patio roof designs.

Patio umbrellas are wonderful roofing patio styles. With a good swimming pool nearby, an umbrella patio gives a natural resort feel to the patio that increases relaxation. While they are made of wood, the umbrellas usually come in different colors. One very good thing about this patio design is that it can easily be closed down or adjusted to taste.

Canopies and gazebos are made out of iron or wood. They also come in various shapes and sizes. The covers are moveable. The fabric and draping come in many designs and colors. Some are even water proof. Trellis and vines can be added up to the sides of the vines to climb up and add a more natural feel Using simple wood pergola Patio roof designs will make the whole terrain a site to behold, especially when properly maintained. A very innovative touch to the entire property can be enhanced by the color of paint and designs applied on the patio. Planting ornamental plants will add up to the artistic feel of the patio.

A good patio cover design that is used mostly on summer is the vinyl Awnings. They come in many colors, designs and sizes. They also make good poolside beauty and comfort additions.

If you want a more permanent fixture for your patio roof designs, a metal patio roof should be one of the styles to consider. Made of corrugated metal sheets, it is very suitable for rainy seasons and last quite long. When attached to your home, maximum shade from excessive sunlight and rain is guaranteed.

A clear glass patio can be tinted, depending on choice. It is beautiful and labels your property and elegant. With a glass patio, sunshine can be let in, as well as a good protection from the elements. They are also strong.

Another affordable patio roof design to use is the Aluminum Pan roof. Besides durability and affordability, it can also be maintained with minimum costs. A cool shade in summer, a shield from the rain and a good protection from the elements is what this roof style offers.

In choosing a roof design for your patio, it is advised you choose the designs that will so complement your house design that it will be seen as part of your house that it really is. Most importantly, uniqueness is what makes the patio roof a site to behold.

Wendy Pan is an accomplished niche website developer and author. To learn more about patio roof designs, please visit My Room Additions for current articles and discussions.

Tract Houses Framing Problems

The house you live in was probably a mass produced home built as part of a housing track. The track home is a rapidly built house in phases. These phases if possible will over lap the other home building trades. If possible you will have the plumbers working on the same house as the electricians and the framers. This is called fast tracking.

Fast tracking a house is building a home as fast as humanly possible. So you can imagine the pressures put on all of the people involved in building a track home.
The pace is so fast sometimes that I have seen job superintendents and foremen look like they were actually going to blow up. I mean explode from the pressure they where under.

Framing the stairs on the job was the same experience for me most of the time. Sometimes I had three jobs going at once. Think about it. At the most, I could only go to each of the jobs twice each week. That involved working on Saturday of course. This made a lot of framing foremen extremely upset. They had full time crews on their jobs always working five days a week. If I missed one day of work. I was behind for the rest of the job.

Now it rarely happened but if I did miss a day of work I had to make it up some how. The only way to make it up was by working late or on Sunday. Well most of the time I worked six days a week from 7:00 in the mourning until 5:00 at night. So working late meant sunrise to sunset. Oh did I mention that I did have a family. This wasn't easy for them either.

One time I got so far behind on a job that I was putting stairs in while they were roofing the houses. Talk about one unhappy foreman. I think you get the idea about the pressure I was under to install these stairs on time. My experience building stairs on track built homes taught me to build homes extremely fast while being proficient.
I'm not interested in working like that anymore. My life is simple now and I want to keep it that way. The next time you see a construction worker working late on a Saturday show some compassion. Maybe by reading this article you will understand some of the pressure he is under.

Building tract homes is hard on you mentally and physically.

Happy Home building.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more building stairs books and adding useful content to help solve problems created by the lack of construction knowledge in the building industry. Stairway Safety

Stucco Crack Repair Painted

Window Header Framing Problems - Building Problems

As a building contractor it is my job to assemble the house to meet the specifications from the architect and the structural engineer. I do this by looking at the building plans and installing the specified lumber sizes. I can take it upon myself to install a larger size wood beam or window header adding an additional cost to the job of course. I don't think so.

It's not uncommon for a framing contractor that has an additional 5 foot scrap piece of 4 x 8 left over that he now has no use for. He can then choose to use the 4 x 8 instead of a 4 x 6 for the window header. This type of building is common and acceptable.

If the structural engineer calls out for 4 x 6 window and door headers do not take it upon yourself to replace the 4 x 6 with a 4 x 4. I have seen too many framing contractors or carpenters make an on-the-job judgment like this.

A good example would be a single story house with 2 foot wide windows that require a 4 x 6 window header. As the carpenter builds homes over the years he can come to his own conclusion that a 4x4 will work fine for this application. Again keep this in mind as a framing contractor and a carpenter you are assembling the home not designing it.

Do not change the sizes of any headers or beams.

A long time ago carpenters used a standard rule of thumb, you could go up two sizes larger than the window opening for your header. Let me give you an example of what I'm trying to explain.

A 4 foot wide window opening would require a 4 x 6 window header. A 6 foot window opening would require a 4 x 8 window header. This should give you an idea of what I mean by going up two sizes larger than the window opening to figure out the lumber necessary to use for your window header.

This rule of thumb does not necessarily apply in today's building industry. The reason for this is structural changes from earthquake damage. The structural requirements that are required for building a home require a lot more metal bracing and strapping. Therefore some of the lumber requirements for beam sizes and window headers will be different.

This message is for general contractors, framing contractors and carpenters. When installing a window header and you take it upon yourself to change the size you also assume the responsibility if the building fails. This type of mistake is common and you guys know what I'm talking about.

It's not worth it. Keep in mind you are the assembler and not the designer of the building you are working on.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more Building and Remodeling Library and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Visit us and get more information on building and remodeling your homes and House Framing Structural Repairs

Old Concrete Stairs

Advantages and Disadvantages of Solar Power

Solar power is starting to go main stream. While this technology has been around for some time, many people are just starting to learn about alternative fuels such as these. They have been getting a lot of buzz because of high oil costs. The inability to afford rising fuel costs, have forced some individuals to think of new ways to run their homes. One way is to use energy from the sun. There are advantages and disadvantages of solar power. Let's discuss the advantages first.

There are many well noted benefits of sun energy. The ones that are most often discussed include cheaper energy costs, clean fuel and less dependence on oil.

In recent years, utility bills have gone through the roof in many parts of the world. Oil prices are skyrocketing and global supplies are diminishing. This trend is not going to cease worsening. Some people have been unable to pay their bills, while others have had to cut back drastically in other areas of their life affecting their lifestyles to a great measure. There have been many families who have had to go without heat simply because they could not come up with the money to pay their utility bills. Because the sun is a free fuel source, it is now possible for us to cut back on costs.

Sun energy is also good for the planet. It does not emit any harmful gases. It also makes people who use it less dependent on oil. Their monetary outlays are also not dependent on oil prices.

As noted earlier, there are advantages and disadvantages of solar power. We have already discussed the advantages, now let's discuss the disadvantages.

The biggest disadvantage of tapping on sunlight as a fuel source is the high cost of purchasing the panels and then having them installed. Thankfully, there are online guides that will give step-by-step instructions to build and install your own. For around $200 worth of materials, you can do everything yourself.

As you can see, there are both advantages and disadvantages of solar power. Sun power can replace oil based fuel. As a result, an individual can save money and do something good for the environment. The main disadvantage of using sunlight to provide energy is that it can be costly if you pay someone to install such a system for you. However, you can save a ton of money if you create and install the solar panels yourself.

Tired of high electric bills? Discover how thousands of families are using homemade solar power systems to power their homes!

Advantages and Disadvantages of Solar Power

Solar power is starting to go main stream. While this technology has been around for some time, many people are just starting to learn about alternative fuels such as these. They have been getting a lot of buzz because of high oil costs. The inability to afford rising fuel costs, have forced some individuals to think of new ways to run their homes. One way is to use energy from the sun. There are advantages and disadvantages of solar power. Let's discuss the advantages first.

There are many well noted benefits of sun energy. The ones that are most often discussed include cheaper energy costs, clean fuel and less dependence on oil.

In recent years, utility bills have gone through the roof in many parts of the world. Oil prices are skyrocketing and global supplies are diminishing. This trend is not going to cease worsening. Some people have been unable to pay their bills, while others have had to cut back drastically in other areas of their life affecting their lifestyles to a great measure. There have been many families who have had to go without heat simply because they could not come up with the money to pay their utility bills. Because the sun is a free fuel source, it is now possible for us to cut back on costs.

Sun energy is also good for the planet. It does not emit any harmful gases. It also makes people who use it less dependent on oil. Their monetary outlays are also not dependent on oil prices.

As noted earlier, there are advantages and disadvantages of solar power. We have already discussed the advantages, now let's discuss the disadvantages.

The biggest disadvantage of tapping on sunlight as a fuel source is the high cost of purchasing the panels and then having them installed. Thankfully, there are online guides that will give step-by-step instructions to build and install your own. For around $200 worth of materials, you can do everything yourself.

As you can see, there are both advantages and disadvantages of solar power. Sun power can replace oil based fuel. As a result, an individual can save money and do something good for the environment. The main disadvantage of using sunlight to provide energy is that it can be costly if you pay someone to install such a system for you. However, you can save a ton of money if you create and install the solar panels yourself.

Tired of high electric bills? Discover how thousands of families are using homemade solar power systems to power their homes!

DIY Bathroom Remodeling - Home Remodels

The first question you need to ask yourself when remodeling a bathroom is can you actually do the work yourself or do you have someone that can help you with the remodeling. If you don't know anyone and can't do the work yourself, I would suggest hiring a contractor with experience remodeling bathrooms.

If you can do the work yourself or think you could do the work yourself, why not give it a shot. Any experience you have in construction or home remodeling, is going to be beneficial to your bathroom remodeling project. There is plenty of information on the internet or in your local libraries on bathroom remodeling and these often prove to be great resources for do it yourselfers.

As an experienced contractor I have gathered a great deal of information through books, at work and watching local home improvement shows. The biggest problem with the show's and quite a few of these books, is they don't provide enough information. Most of the time they provide you with the basics of bathroom remodeling and you could soon find yourself in trouble or seeking the advice from a home improvement professional.

The largest benefit for doing the bathroom remodeling project yourself, could be the money you save, along with the satisfaction of completing the project. It makes homeowners feel good when they've completed a large home remodeling project, like a bathroom remodel.

If you don't have the time, lack the experience or a combination of both, I would suggest hiring a contractor to relieve you from the stress and frustration of your bath remodeling project. The more complex your bathroom remodeling project is, the greater the degree of difficulty, the longer it will take to complete the project. Some of these projects can take up a lot of your time.

If you're working on galvanized water supply pipes or old cast iron waste pipes, you could find yourself hiring a plumber to install your bathtub and fixtures. These old pipes create problems for most do it yourselfers and I would suggest hiring a professional, whenever you run into a problem you don't feel comfortable with.

Choosing to tackle some of these difficult problems yourself, could lead to water leaks and more damage to the home eventually costing you even more money than the original cost of hiring an experienced plumber in the first place. When it comes to water, structural framing and electricity, think twice, especially if you're not experienced in these areas.

My advice to do it yourselfers is to hire a professional if you're not comfortable or seek the advice from a contractor or someone with considerable experience bathroom remodeling.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping.

If your looking for some more House Remodeling Pictures or home building ideas.

Moist Stop Over Window Needs

Before Buying Kitchen Sinks

Before choosing and buying a kitchen sink, these are some of the basic things you should know. Kitchen sinks have three major designs: the single bowl, the double bowl and the triple bowl sink. The names of the designs indicate how many sink bowls they have. The double bowl, which is said to be the most common, may have different-sized bowls or identical-sized ones. The double bowl design allows you to do two things at once. A sponge can be placed in the third bowl in the triple bowl design.

When considering which form your kitchen sink should be, consider the space allotted for it. If it is not very big, consider using the single bowl since a double or triple bowl design may not allow for a large container to fit. The depth of the bowl is also important. Deeper sinks lessen splashes but it may increase the need for bending over the sink. Also, take into account the under-counter space when determining the proper bowl depth.

Another aspect of kitchen sink design is mounting. With a top-mount sink, a hole is cut into the countertop and the sink is placed in it, with its edges resting on the countertop. An under-mount sink, on the other hand, is attached to the countertop from below. In contrast to the top-mount sink, the edges of the countertop surrounding the sink must be cleanly cut since they are visible. Sealants are also used to ensure that under-mount set-up is watertight. Another kind of mount is the apron kitchen sink. It is so called because it has an "apron" that hangs over the side of the countertop where the sink is perched.

Various materials can be used to make kitchen sinks. One of the most common materials used for sinks is stainless steel. This is a good quality material that rates well in terms of durability, cost-effectiveness and maintenance. This kind of sink is quite sturdy and good quality stainless steel sinks are generally not as noisy some people would expect. Another material used for kitchen sinks is porcelain on cast iron. This material is unaffected by heat or cold but it can be damaged by forceful blows.

Enamel on cast iron or on steel is another alternative. They are resistant to heat and cold and they are easy to clean but like porcelain, heavy blows can damage the sink. If the enamel is damaged, the underlying metal is prone to rusting. There are also kitchen sinks made of solid materials like granite. These are matched with countertop materials to create a chic, modern look. Scratches on these materials can be removed through sanding. The downside of this material, however, is the fact that some of them can crack under heavy force.

Another thing to consider when choosing sinks is the tapping arrangement. If you intend on having many sink accessories, such as a sprayer and a soap dispenser, you have to consider how they will be arranged around the sink bowl. Function is more important than form. What may look good is not necessarily what is best for you and your kitchen, so choose wisely.

April Kerr owns website Euro Fronts which is all about kitchen design ideas such as kitchen design programs and kitchen storage ideas.

Bathroom Remodel Investment If Selling

When you're planning any bathroom remodel, consider the costs of the bathroom remodeling versus the return on the actual investment. According to one of the popular remodeling magazines, the average bathroom remodel throughout the country cost around $16,000.

If you were to sell your house within a few years, you could recoup around $12,000 of your original investment. This would translate into a $4000 loss to your pocketbook eventually.

Using these numbers for your bathroom remodel investment, you would recoup around 75% of your original investment. If you know anything about investing money, this will not be a good rate of return and if you keep investing your money like this, you won't have any to invest, eventually.

Keep this in mind, if you're going to be selling the home within a few years. If the bathroom isn't in good shape and you're not planning on selling soon, you could remodel the bathroom and enjoy it for quite a few years. You wouldn't be looking at this as an investment but as maintenance costs.

If you need to remodel the bathroom, because it's getting a little run down and will create a problem when selling a home, I would suggest minor remodeling, if the toilet, fixtures and bathtub is in good condition, I would suggest changing the sink, cabinet, bathtub surround, flooring and some new paint.

If you're remodeling cost is now at $8,000, you would recoup at least $6,000 and would only lose $2000 on your original investment. Now this still doesn't make any sense, if you're still losing money, why would you even want to remodel the bathroom. Why not sell the home as it is and not lose any money? This is a tough decision to make and keep in mind, these are average costs.

You could recoup less or more than 75% of your bathroom investment costs.

Most real estate professionals will advise you to remodel the bathroom for two reasons, for one the house will sell for a few more dollars, and this will increase their sales commission. The second one is probably the most important for any one selling a home, the home could sell faster.

If you have the time and are in no hurry to sell the home, I would suggest trying to sell the home as is first and then sprucing it up, if you can't sell it within three months.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping.

If your looking for some more House Remodeling Pictures or home building ideas.

Demo Stucco Around Window

Bathroom Moisture Problems - Home Remodeling

Right above my bathtub in my master bathroom the paint is peeling off the wall. The area is peeling above the tile in my bathtub and shower combination. I tried to glue the peeling paint back and only made the situation worst.

First things first. The paint is peeling because there is to much moisture in the bathroom while you are using it. Do you have any windows you can open or a ventilating bathroom fan. If you have a window crack it open part way while you are showering.

The water droplets will accumulate on the walls and drip into any cracks. Right above the tile grout is a great place for moisture to accumulate. Oh yeah moisture loves grout and drywall. If you have any unpainted areas or an area that has cracked. Guess what you have now.

Your paint is peeling because the bathroom gets hot and cold. Moist and dry. If you have the door and windows shut. You just created a moisture trap. Most people prefer their privacy and will closes the door when using the shower. Well then open the window and let some cold air in while you are taking a nice warn shower. I don't think so. Most showering fools don't like that idea either.

Ok one more idea keep the windows shut so you don't let the cold air in. Then lock the door so no on barges in on you. If you have a ventilation fan turn it on. This will at least pull fresh air in from under the door and send the moist air out of the house.

But the fan is so noisy and I can't enjoy my nice warm vapor producing shower that will eventually cause me to get sick from mold particles floating around in the air while I am using my bathroom.
Does this about sum it up for you and don't we all do this from time to time. We want to enjoy our shower time, so we close up everything and when we are in our bath sauna environment relaxing our house is getting some damaging moisture that could cause mold and mildew.

Open a window or door a little when you shower. Get some air circulating through the bathroom and prevent damage to your nice house.

Put up with a little inconvenience for you homes sake and your pocket book.

Greg Vanden Berge has been in the home building and remodeling business in California for over 30 years. With this knowledge he has created a few websites that provide useful information for home owners as well as contractors. His main goal is to educate professionals in the home related businesses, dealing with problems that can easily be avoided with just a little bit of information.

His website provides all kinds of answers to remodeling and new house building in North San Diego Home Remodeling Carlsbad Home Remodeling

Visit us now for Bathroom Ideas

Back Porch Handrail

Home Improvement Software

Colors play a very important role in your home improvement project. They widely express your nature and influence your mood. Deep and dark colors, for instance, depict deep and energetic feelings while light smooth colors develop a calm environment. But often times, you are confused about what color to choose. People don't know what colors would be best for their hallway, bedrooms, dinning rooms or bath and the kitchen. These are the people who ask for professional advice even when they have to paint their walls themselves.

This problem can be solved very easily with the help of home improvement software. It saves you the hassle to do and redo your home; and it brilliantly extends your visions. If someone has selected a color that doesn't seem to satisfy his mood, he will have to repaint his room with a new color and possibilities remain the same if the person is not very creative or if he has lack of experience. All this hassle will cost him a lot more than the budgets. Wastage of time is another related story. However, things are completely different when it comes to home improvement software.

With home improvement software, you can simply do wonders. You don't need any professional advice; you don't need anything else as well. All you are going to need is a piece of sharp brain and basic computer skills. From your bedroom to you kitchen and garage, take a preview of everything you want or do not want using home improvement software. One of the most acknowledged features of home improvement software is that you can adopt eclectic decor style and paint your room with different colors. If they suit you fine, get yourself working on them from out of your computer.

This software is simple in use and anyone can be able to decorate his/ her room, in fact, entire home with the help of this software. Besides being a magnificent tool for consumers, home improvement software has also been widely accredited among the contractors, builders, architects and designers. Because it's not just for colors, its uses are manifold. So, if you are planning any home improvements, get home improvement software in first chance.

For more about painting, designing, remodeling and everything that links together to result in a perfect home improvement, you can visit http://www.theyarelocal.com/articles/home_improvements/index.php

Generate Homemade Electricity Yourself

An alternative way to create electricity had always remained a big issue for every scientist and common man. The best possible way to produce alternate electricity is by wind power. Now the question arises is "how you can actually do it?" Thinking? You don't have to. I am suggesting a very good and effective method to do it. All you need is to make a wind turbine or a windmill (same thing).

Here goes the method to make it. It's very simple and anyone can make it by his own and using his home spare things.

Blades of wind turbine are turned by wind and the shaft spins, which is connected to the generator and electricity is produced.

Main parts of a wind turbine are:-

1) A generator
2) Blades
3) A mounting
4) A tower
5) Batteries
6) Electronic control system

A 30volt motor is needed. Now hub and blades are to be connected. For blades, take one 24 inch long pipe (may be pvc) and then cut it into 3 pieces by its circumference. For bolting blades into hub, a toothed pulley of 5 inches can be used, where the motor shaft can fit into. Now assemble blades with hub, by drilling holes.

Mounting of the turbine can be done by strapping the motor into a 2 X 4 wood piece. Heavy aluminum sheet can be used to make tail, which will keep turning into wind. 3 feet diameter plywood cutout can be used for tower base. A U-shaped assembly having a 1.5inch Tee in the middle has to be built. Batteries with blocking diode connected to batteries (for power prevention) are needed to spin motor/generator. Charge controller should be connected for running everything. The Controller is connected to wind turbine. Battery supply all load and needs to be charged. Well, you are done!

I know it's probably very difficult for you to understand all this, if you have never done anything similar before, that's why if you want to make your own windmill, I highly recommend you to use professional instructions, when assembling everything. Click here to find out to get them.

What Causes Attic Odors And Stra

The Ideal Shower Tray - Home Tips

Choose the ideal shower tray

Keep your bathroom floor splash free with a shower tray

Start with these frequently asked questions

Which material should I choose?

Acrylic is warm and cheap. Go for a reinforced model that's 5-8mm thick to avoid flexing, which can lead to leaks where the tray meets the wall.
Enamelled steel is tough, but can be cold underfoot and more pricey than acrylic.
Fire clay or ceramic is rigid, long lasting and easy to clean, but can be heavy and the floor may need to be reinforced to support the weight.
Stone resin or composite is stable, durable and comes in lots of shapes and colours.

What size should I go for?

Shower trays range from 80cm x 80cm to 170cm x 90cm.
Flush-to-the-floor models create a wet-room feel. Brands to look for are Kaldewei, Bette and Roman. If you don't want a screen, you'll need to 'tank' the room by applying a waterproof membrane under the floor.
Low-level trays (under 4cm high) mimic a wet-room look without the need for tanking.

Which is the best colour?

White is popular as it's clean, fresh and goes with other fittings, but you'll also find black, anthracite and acid brights. The widest colour choice is in composite trays. Corian comes in over 70 shades, and ceramic ore fire clay is great for high-gloss colour.

Where can I put it?

This depends on the position of any waste pipes and water supplies. A solid floor makes it harder to move pipes (although one solution is to build a false floor on top). Corners and alcoves are useful because the walls form a natural enclosure. If you have room, consider fitting a large tray against a long wall to make a striking focal point.

Can I fit one myself?

If you're replacing like for like, it's fine to fit a tray yourself. Choose a tray with adjustable feet to make levelling simple. If you need to relocate drains and pipework, it might be wise to call a plumber.

Tray shapes to look for:

Square
A great choice for an alcove as it can slot neatly into the space.
Quadrant
A quarter circle shape that's good for corner installations.
Pentagonal
A corner model with five sides is just the thing for smaller spaces because it won't protrude into the room as much as a standard square tray.
Rectangular
Ideal for twin showering, with more space for showering than a square tray would offer.
Walk-in
Has a drying area by the entrance, which keeps bathroom floors drip and slip free.

Good to know

Shower trays need to be totally level to ensure a watertight seal and perfect drainage - check with a good-quality spirit level.

You can find more information on interior design and interior design ideas at idealhome

House Pocket Door Problems

Just a few months ago I went over to repair a pocket door that was closing at a weird angle. This was the first time I had ran into this sort of situation and was definitely confused. I got a flashlight and started looking inside the pocket door frame. I had a hard time finding the problem but when I did it was obvious.

As the pocket door was sliding closed it would work perfectly but when you went to open it the bottom of the door would stick out about an inch and a half passed the door jam. The problem turned out to be the track was missing a screw in the very back and as the door slid back into the frame the tracking would hang down at an angle from the weight of the door. There was no way to reach the screw because it was at that very back of the pocket door frame near the framing itself.

In order to fix the pocket door problem I was going to have to remove a good sized area of the plastered wall at the upper right hand corner of the pocket door frame. This was the only thing I could think of and would require a simple wall patch and some paint to make the repair complete.

This job took me about one hour to cut the hole and replaced the screw that had fallen out of the pocket door tracking. I then use some fast setting drywall plaster and some fiberglass drywall tape to repair the wall. This took another hour to finish the drywall properly.

Some pocket door problems are a little easier to repair than this one. Most pocket doors seemed to have problems sliding and eventually are left closed, never to be used again.

Painting the doors over and over again can actually add to the thickness of the door or excessive moisture in the home over long periods of time can also cause the door to swell preventing it from opening properly.

Painting the rollers themselves or the track that the rollers ride in can create a problem with rolling the door easily and effortlessly. If the pocket door rollers or tracking is damaged they will have to be repaired or replaced, obviously. Some people actually spray silicon on the rollers or grease the pocket door wheels and over time the track becomes caked with dried grease and dirt making the door hard to open and close

Here's one most people don't ever think about and yet I have faced this problem more than once. "The Dreaded Picture Hanger". Most people don't realize that the pocket door will not operate very well with a nail driven through it. I have had people complain about their pocket door not operating properly but they can wiggle it a little.

When I come upon a situation like this it usually just requires removing the nail that the picture is hung upon.

I have also seen instances where the home has been remodeled and new floor trim or door trim has been installed. The finish carpenter using his nail gun without changing to a shorter nail has himself nailed the pocket door shut. This could be a big problem because the nails are so thin they could be hard to remove.

Well that's all I can think of for pocket door problems that I have ran into for now. Until the next article have fun remodeling your home.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more Building and Remodeling Library and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Visit us and get more information on building and remodeling your homes and Vista Door Repairs

Check Brick For Flashing

Vinyl Glove Information And Sizing Recomendations

Using vinyl gloves is a common practice in any industry where bacteria and viruses can be transmitted. The food service industry is a large user of vinyl gloves because they are very affordable and extremely effective at preventing the spread of germs, bacteria and viruses. Vinyl gloves are economical and stronger than latex gloves. The vinyl used in vinyl gloves is a synthetic polymer than is more resistant to tearing and puncture than latex. Used widely in the food preparation and food handling industries vinyl gloves can give you an almost bare hand feel when grasping items. Unlike latex, vinyl is a synthetic substance that very rarely causes an allergic reaction. Vinyl gloves are also used widely in the cleaning industry as barrier against bacteria and infection in restroom and hazardous biological material cleanup.

Vinyl gloves come in a variety of sizes and come in both powdered and powder free forms. Powder is added to some types of vinyl gloves so that they are easier to put on and the powder can also help in preventing perspiration of the hands. It is an industry wide standard that there are usually 100 gloves per box and the one glove will fit both hands. Glove sizes range from small to medium. Small gloves will fit a hand size of 8 and below. Medium vinyl gloves will fit a hand size of 9. Large vinyl gloves are suited for a hand size of 10 and extra large gloves are to be used for hand sizes of 12 and above.

Vinyl gloves and latex gloves are now being used by the US Postal Service as a precaution against terrorism. Vinyl gloves act as a barrier against viruses, bacteria and germs that could potentially be sent in letters and packages. Overall vinyl gloves are an effective way to stay safe in an unsafe world.

Great cleaning tips and cleaning information by Lee Harris can be found at http://www.monsterjanitorial.com. Lee Harris is an expert in the cleaning supplies and janitorial products industry and can answer all your questions about vinyl gloves. Our information is concise and will give anyone basic information about the right cleaning tool for any job. On our cleaning site we also have a cleaning forum where our users can assist each other with their own questions. A cleaning services directory is readly available for cleaning companies to advertise their site by the state in which they are located.

Bathroom Contractor Safety - Remodeling Contractors

This article isn't about contractors using the bathrooms safely, it's about contractors working on someone's house, remodeling a bathroom. When working on any part of the home, a contractor and his workers should think and work safely on any project, but working in a bathroom with more than one person can become a contractors safety nightmare.

I was working in a kitchen one time, with 11 workers. I finally couldn't take it anymore and left the job. This did not make the general contractor very happy but it saved me from getting into a fight with one of the other workers. Whenever you're working in a confined area like a kitchen, bathroom, crawlspace or attic, safety is going to be a priority and should not be overlooked, because someone else wants to get the job done two days sooner.

Most accidents happen working in confined areas because of poor time management or someone else is in a hurry. Whenever you start to speed the destruction or assembling of any part in the house, you're increasing the risk of an accident. Most accidents happen from people in a hurry or poor planning.

As a bathroom remodeling contractor, you should plan properly and only use the minimum amount of people necessary to work in confined areas. If you are tiling the bath tub surround, one to two people is more than enough. If you're tearing the bathroom apart, during the demolition process, a maximum of three people should be used. During the demolition process, make sure your workers are thinking safely and clearly. Ripping a large piece of plaster off of the wall, that has wall anchors in it could grab a hold of something like an electrical wire or plumbing pipe. This of course could cause damage to the home, as well as a risk of electrocution.

Use your head when working in the bathroom and you will greatly reduce the possibility of any accidents. Accidents can easily be prevented my working cautiously on anything.

Bathroom Remodeling Contractor

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors

If you're really interested in learning more about remodeling, new home construction, home maintenance, home repairs and really want to get the nuts and bolts of home improvement. Visit our web site and select from the best-selling home building books on the Internet

Modular Homes - A Home Builder's Delight

The Advantages of Modular Homes

Modular homes sections are constructed in climate-regulated manufacturing plants, allowing builders to eliminate the expensive delays they experience whenever the weather their building sites turns against them. The time it takes to have a modular home up and in move-in condition from the moment it is ordered can be as short as ninety days, and that kind of turnaround can mean savings which a builder can pass along to a customer. Being built inside and away from the weather also means that modular homes can be ordered at any time of the year.

Discounts On Materials

Another advantage modular homes offer for builder-developers is that their materials, both for the exterior, and the interior finishing materials and appliances, can be ordered in bulk lots, at significant discounts. Yet they will be equal in quality to any of the materials or appliances used in standard homes. This is another huge savings for the builder, and eventually for the customer.

Factory Site Quality Control

One often overlooked advantage of modular homes for builder-developers is that because a modular home is manufactured in a single factory, those who are building it will be subject to the same performance standards. The end result is a home of uniform quality throughout, and both the home builder and the future home owner will benefit from knowing that.

Customization

How about the fact that going modular allows a builder to tailor his home plans to his customers' specifications? This is a terrific advantage of modular homes for builder-developers because it gives the builder the flexibility to either draw up his own plans or order homes built to an individual buyer's request. Modular homes can be created in any architectural style, and a design plan can even be changed via computer if the customer comes up with a new idea.

Unlimited Choices

Another advantage of modular homes for builder-developers is that there is literally no limit to the size or architectural detailing of these homes. From vacation cottages and log cabins to palatial multi-storey seaside retreats, of even multi-family structures, modular homes are available for every possible taste and budget. There are even some builders who now choose modular construction for their commercial office projects.

The advantages of modular homes for builder-developers have become so great that they clearly outshine any small stigma which may remain in the minds of some when they hear the term "modular home!"

You can also find more info on buy modular home. Modularhomesbasic.com is a comprehensive resource which provide information about Homes.

Cheap Roller Shades

Cheap roller shades are most preferred for the exterior decoration of your house or business premises. Use of modern fabrics and minimalism in cheap roller shades makes them popular. Classic simplicity and low cost also add to their effective consumer reach.

These shades are mostly available in standard yet with an overturn roll causing the fabric hides the spin of the shade. If placed with a cassette head rail system the cheap roller shades look more poignant. Ornamental hems, ring pulls and tassels can add to the decoration of your window at home.

These shades with light filtering fabrics and space darkening materials look more attractive. Most of the houses and business apartments in developing countries prefer these types of shades not only for their cost effectiveness, but also for the inherent simplicity. Selected roller shades with trendy fabrics, streamlined roller system, novel hems and ritual accents look more poignant. Limited life time warranty adds to the consumer satisfaction.

The typical elastic cord, now replaced with a chain within the rail workings makes it doable to raise and lower the blinds to a definite position. With the increasing use of newer roller shades materials, energy efficiency and sound absorbing capability have increased considerably. Those nostalgic about the exterior dcor of the bygone era, you can use decorative tassels to add charm and convenience to your roller shades.

These shades are available in three varieties depending on size - inside mount, outside mount and cloth measurement. Incase of inside mount the over all width is 49 7/8" with fabric of 48 ". In outside mount the width of fabric is 48 7/8 and the clutch width is around 50". Fabric wide of 50" against overall width of 51 1/8" the category falls in to cloth measurement.

These products are well appreciated for their least expensive nature. They are quite durable when used with superior rollers like the one with cellular waves. They come in numerous sizes like 3/8", 1/2", 3/4", 2" variations. Generally, the larger the plate, the more expensive is the shade. Blackout featuring pleats are even more costly. Beware of cheaper varieties as they lose their pleat shape effortlessly. Shades with "D cell" design. And with arches, angle-tops and bottom originated are quite decorative. Those with exquisite bamboo shades from Asia are very distinctive, though expensive.

Cheap roller shades include beautiful varieties like Vignettes and Cascades. These are less costly compared to Roman shades. Silhouettes roller shades are the most versatile and unique and command greater demand. Build your home of your own style with these shades is sure to give it a distinctive look.

Dave Clark has many years experience writing articles, he has also written many books, and is well known in the industry. Dave currently has many projects he is working on, he is also on the board of directors for Cushy Sofa a manufacturer and online retailer of Divans, Memory Foam Sofas, Memory Foam Pillows, Memory Foam Mattresses, Buy your Memory Foam Toppers, direct from the manufacturer

Modular Homes - Total Cost of Construction

So you are looking at property and have decided to build a modular home. You may have even decided to act as your own general contractor. You are now putting together a budget. It is fairly easy to get the prices for the land and the modular home, but it is not as cut and dry to piece together everything else that will be needed at your job site.

I built a modular home about two years ago and went through the same process. I had a difficult time finding ballpark figures for many things when trying to budget my project. Below is a list of things to keep in mind when putting together your budget:

1. Utility hooks ups and your distance from existing utilities (electric, natural gas, propane, water)
2. Excavation for foundation/basement
3. Foundation and basement
4. Driveway costs
5. Electrician to wire up basement
6. Plumber to do rough plumbing under basement floor prior to setting house
7. Concrete flatwork (basement floor)
8. Plumber to do finish plumbing (hook home to rough plumbing)
9. Electrician to hook house to utilities
10. Plumber and electrician for a septic tank (if needed)
11. Carpenters for a deck
12. Contractor for a patio

It is important to get multiple bids when costing your project. Another thing to keep in mind is that you should not necessarily choose your contractors because they are the cheapest. You must check with references, view previous work they have done, verify that they are insured and licensed to work in your city. I met with my foundation contractor at a job site he was working on and was so impressed that I chose him even though he was the highest of my three bidders. I could have saved a couple of thousand dollars with someone else but I doubt it would have been worth it.

If you do not feel that you have the time or expertise to manage the contractors involved, many modular home builders will act as your general contractor for a fee. This may be the route to choose if you do not have time to meet with all of your contractors at the job site.

Tim Montey is a modular home enthusiast who built his first modular home two years ago and detailed that experience, lessons learned and costs at http://www.modularhomechoice.com

Find more detailed information on the total cost of a modular home at the above link on the Financing page.

Interior Roof Shaped Ceiling

Hiring Home Contractor Painters For Your Home

Hiring somebody to work on the exterior painting can be a big decision for homeowners looking to make improvements to their homes. While they may think they can handle such large, complicated projects themselves, they often find that they are in over their heads. Having a professional come do the work for them is often their best bet at getting the work done properly and in a timely manner.

Finding a good home contractor painting the house will put a smile on any homeowner's face. Many painters will provide their clients with the very best in home painting and will strive to give the homeowner exactly what they are looking for. Such professionalism goes a long way in ensuring that the project turns out looking its very best. This is welcome news to homeowners worried about the effectiveness of many contractors and their painters.

In reality, contractors are good, reliable individuals with the proper training and skill to provide their clients with the very best in exterior painting. Knowing exactly how to handle problems when they arise and how to come up with viable solutions when necessary make having home contractor painting a special treat for homeowners remodeling their house. The paint job is often one of the most important aspects of a remodel. If the paint job is done in the proper way, then the rest of the remodel will come together nicely. If it is done poorly, then the remodel will not quite look right. This may even be noticeable to the neighbors and nobody likes having the ugly house on the block.

Hiring professionals is a good way to ensure that the house gets the best paint job possible. This will make the homeowner happy, as they can rest easy knowing that the services of the contractor will ensure that their house looks its very best. They can then focus their attention on other areas of the remodel that may not require the professional attention of a contractor. With home contractor painting, homeowners know they are getting their money's worth. Not only this, but having the extra help will alleviate a good deal of the frustration and headaches that a homeowner may experience while going through such a large project.

The value of home contractor painting often exceeds the cost. Such a great value will put homeowners at ease when considering if they are making the right choice. Many choose to do the project themselves, often leading to many mistakes or mishaps that can prove costly to the project. Some hire amateurs with no formal training and no real experience in exterior painting. This often leads to an unsatisfied homeowner wishing they had opted for the professionalism of a contractor.

When considering hiring a homeowner, it is important to realize how important the job really is to the overall appearance of the house. If the painting is done right, the rest of the house will come together nicely to create a beautiful house the homeowner will be proud of.

More information on College Works Painting home repair for your home is just a click away.

Elements of Green Building - "Steel Framing"

What is Steel Framing? -

Imagine the wood framing of a traditionally built home, but where there are 2x4s, 2x6s, etc., there are steel studs. The studs themselves start out as large steel sheets. These sheets are passed through a series or rollers, none of which use heat, to bend the steel to make more useful shapes for buildings, like the flanges, web, and lips of a stud or C-shape. Steel studs come in various shapes and sizes, much like those that builders are accustomed to seeing in dimensional lumber, including 2x4, 2x6, 2x8, 2x10, etc. The lengths are custom cut in the steel plant. And, since there is no heat used to shape the steel, no integrity or strength is lost. The shape makes the studs stronger than the original steel sheet. The steel studs can either be sold as is or placed into configurations to be sold as wall panels.

Applications -

Since steel is so strong, durable, versatile, and affordable, it can be used as framing for a great variety of situations, from superstructures like skyscrapers, bridges, and high-rises to lower-scale building projects like commercial shopping centers and residential homes. Since steel's strength-to-weight ratio is so high, it is ideal for situations that require long spans. For example, steel opens up possibilities for wide, open living spaces in residences.

Advantages -

* Steel framing's higher strength-to-weight ratio gives designers and engineers more options to use less framing material, allowing longer spans and wider on-center spacing schedules. In other words, fewer studs need to be used in the erection of a house or building, and larger open spaces are available in a home or building.

* Steel studs and joists are strong, light-weight, and made from uniform-quality material.

* Galvanized steel is noncombustible, unsusceptible to rot, and resistant to corrosion. It does not shrink, warp, twist, crack, split, or swell. This means your walls are straight and square for the life of the house, which will be a long life at that. Steel framing contributes to better drywall and exterior appearance, as well as the fit of doors and windows.

* Steel is insect and termite resistant. It is also mold resistant.

* Steel performs well in high wind and seismic areas.

* Steel provides a more reliable supply of framing materials for the building industry. It isn't affected by the shortages and sharp price increases of the lumber industry.

* Remodeling and additions are no issue with steel framing since, just like wood framing, non-load-bearing walls can be removed.

* It is at least partly made of recycled materials and is 100 percent recyclable after use.

* Since steel is fire retardant, withstands high winds, and is more durable in hurricanes and earthquakes, homeowners may enjoy lower insurance premiums.

Disadvantages -

"Thermal bridging" occurs when hot or cold air is drawn to a stud, resulting in heat loss or gain. In cold climates, thermal bridging could result in increased heating costs and in hot climates, heat gain could result in moisture damage. When we build with steel, we use thermal barrier insulating materials to provide exceptional heat and cooling loss protection to steel-built homes.

What makes it "green"?

* Steel is completely recyclable. In fact, steel is North America's most recycled material. More than 65 million tons of steel scrap is recycled each year. More steel is recycled than paper, aluminum, glass, and plastic combined. As an end result, recycling steel scrap also saves landfill space and natural resources. When the steel framing of a home has outlived its useful life, it can be recycled into new steel.

* An average 2,000 square foot steel framed house can generate as little as a cubic yard of recyclable scrap, diverting material for local landfills. This is partly because steel studs are cut to exact lengths from steel stud machines so there are no wastes at the construction site. The wastes in the steel plant are recycled to make more steel.

* Steel framing contains at least 28 percent recycled steel and is completely recyclable. Using recycled steel takes the pressure off renewable resources. For example, a typical 2,000-square-foot home requires about 40 to 50 trees, about an acre's worth. With steel, only the equivalent of about six scrapped automobiles is needed.

* When used with thermal barrier materials, there is minimal heating and cooling loss. Steel framing also results in less loss around windows and doors as well as foundation and roofing connections because the steel will not warp and move, ridding concern of gaps and accompanies energy loss created over the life of the house.

* Steel framing means less need for lumber. Today, more than 90 percent of North America's old-growth forests are already being harvested. This eases the strain on these dwindling forests, saving the wildlife that lives in those forests, as well.

* Steel is non-toxic and allergy free, which means healthier living for occupants.

Written by Tasha Lucas, Monster Constructors, L.L.C

You can also see this article on the Monster Constructors website:

http://www.monsterconstructors.com

http://www.monstergreenbuilding.com

Wood Repair

A List Of Patio Window Coverings

Windows which are unpainted and which are not mounted with curtains or draperies appear boring and lifeless. You could also be seen by the people who just simply happen to pass by near your place.

Hence, you lose your privacy and you become more inclined to getting harassed. Then, the more that you are to be bugged by such concern when you talk about the patio window coverings.

Generally, the basic use of the window coverings are to provide a cover for the interior and then to basically boost the impression created by the decorations used inside.

However, do not misconstrue the fact that you could purchase any patio window covering that you spot at the department stores that you visit from time to time.

You need to think about many elements such as the size of the patio window, the color, design, pattern, and texture of the patio window covering to use, and a lot others. Your taste and preference matters when you choose the patio window coverings.

The following is a list of the most sought after and bestseller kinds of patio window coverings.

1. The blinds. There are generally four kinds of the blinds that you may use as patio window coverings. They are the aluminum, fabric, vinyl, and wood. The two basic constructions of the blinds are the vertical and the horizontal blinds.

The vertical blinds are perfectly utilized for the bay windows, patio doors, and for the corner windows. On the other hand, the horizontal blinds are nonetheless mounted on standard windows.

2. The curtains. These depend on the length that you desire and the color, design, and casement that would truly fit into the patio windows that need them.

3. The swags. These may be matched with the shades, shutters, blinds, and curtains.

4. The shutters. These are the louvers or solid panels that may be available for customization.

5. The shades. These are used for the purpose of blocking or filtering the light that comes into the room.

6. The draperies. They contribute to the formal touch that is endowed to the interior of the home.

7. The valances. These are the adornments that may be added to the layers of the patio window coverings.

These are just some of the choices that you may opt for when looking for the patio window coverings.

For tips on choosing window coverings, visit http://www.windowcoverings101.com

Painting Metal Siding

Plumbers - Get Free PR and Grow Your Profits

Most plumbers do not think they will be able to get their stories into the press and so do not bother trying to get any free PR. This is a mistake, PR is a very powerful method of marketing for free and any business can get a massive amount of free PR which would normally cost a serious amount of money if it was done through paid advertising.

PR actually lends a lot more credibility than traditional paid advertising because when your story is featured in the editorial of your local newspaper, TV or radio station it carries a lot more weight.

There are plenty of people who have turned their businesses around just through using PR. Just by sending a simple one page press release to their local media they got a lot of free publicity and interest in their business. Follow the strategy below as one way that you can try to get some free publicity:-

Promote yourself as an expert in your field and make sure all your local media knows about you.
Use the world around you as a backdrop for what you have to say. For instance, the winter is a time when we all need to keep warm but in the current economic climate where money is tight we want to spend as little as possible to do so. As you are a plumber you could write a one page press release about how you can help home owners keep warm and save money at the same time and include tips on insulation and getting the most from their central heating systems etc. You may need to spend a bit of time doing some research, but if you assure the public that you have some genuine information that will help them you will find it is easy to get some free publicity.

Your local media is always on the look out for fresh, exciting and unusual stories to use, so get your imagination working and come up with some interesting stories to get that free publicity that could seriously increase your business.

Plumbers discover very easy to implement marketing and internet marketing strategies to recession proof your business with this free E-Book from Marketing Man. Marketing Tips for Plumbers

Marketing Man has hundreds of Marketing Tips to help you recession proof your business. If you run a small business visit his website today to get instant free marketing tips to help you fight the credit crunch. Marketing Man

Horizontal Or Vertical Drywall

Moisture Against Gravity - Destroying Walls

Well I'm going to start this article with a little information on a job I did once.

I had been repairing a rental house for one particular homeowner for about three years when all of a sudden I got a phone call from him telling me the rental house was destroyed and he had never seen nothing like this. He sounded so upset over the phone I told him I would meet with him immediately.

On my way to the house I was trying to get an idea in my head what the house was going to actually look like. Since I have been repairing rental properties for over 20 years at this point of my career, nothing really shocked me. I had pretty much seen everything that could possibly be done to rental property by the tenants that lived there. There is a lot to be said about taking care of it as if it were your own.

He was waiting for me at the front door and he looked thoroughly disgusted. As I approached him he was shaking his head and yelling at the same time can you believe these people, can you believe what they did to my house. I was expecting to see the front door ripped off and all the windows broken out of the house but this wasn't the case.

As he led me through the home and I could see the usual clothing on the floor, broken cabinets, a few holes in the walls and of course that awful smell of mold and mildew. All of this stuff was nothing new to me because I'm the guy they call to fix it when a renter moves out of the property.

As I entered one of the bedrooms I got my first glimpse of something I had never seen before but heard stories about and could not believe my eyes. Looking at the walls in the bedroom about 3 feet from the floor all the way around the room, the plaster was soft. It actually looks like someone shoved popcorn into the wall somehow.

The homeowner wasn't even looking at this because of the rest of the damage in the home. I started to explain to him I'd never seen nothing like this but I could guess it was water damage somehow since the plaster was soft. I could actually stick my finger into the wall, that's how soft the plaster was.

My first thought was to examine the carpeting a little closer to see if it was wet. Well it was damp but it wasn't as wet as I would've expected it to be with the amount of water in the walls. With a little more home inspecting I had found the culprit, it was a broken water bed. The water bed was now in the backyard looking innocent.

I couldn't believe a broken water bed could do this much damage so I looked around for broken or leaking water pipes and could not find any. The other bad news I had to inform the homeowner was that the water had damage the bathroom and closet walls also. These walls of course were on the other side of the bathroom walls that were damaged.

Well the point of this story is that water will actually wick its way up or worked its way up into a wall. I had to remove 4 feet of drywall all the way around the room. The plaster or drywall actually acts like a sponge pulling the water into the walls. Hard to imagine that gravity in this case seems to reverse. I would've never thought that water would've traveled so far up the walls creating that much damage.

To repair the rental property I had to remove the damaged drywall, remove the carpeting, dry the wood framing out and put the whole thing back together.

I'm still amazed and will remember that project for as long as I live.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more Building and Remodeling Library and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Visit us and get more information on House Water Damage

New Versus Old Lumber - Structural Failure

During my 30 years of remodeling and building new homes. I have ran across quite a bit of structural framing failures. I find myself answering this question a lot when explaining to a homeowner about the structural failure I am repairing on their home, "Why Didn't They Use Better Lumber" or " Why Didn't They Use Larger Lumber." I really have a hard time answering these questions because I honestly don't know the answer.

However I can try to use some logic and reason to give these people an answer that seems to make sense to both of us. Why didn't they use better lumber, quite simply because, with most older homes that were built before the 1970s they actually do have better lumber. Now you're probably thinking how can these homes have better lumber when the lumber is old versus the new lumber used in a brand new house.

Most of the structural repairs I have made over the years has nothing to do with the lumber and whether it was new or old. A large number of these repairs were caused by neglect and poor maintenance.

The lumber in most older houses are from older growth trees. Some of these trees were extremely large and only the premium parts of the trees were used. The premium lumber is cut farthest away from the center of the tree. Now the larger the tree it makes sense that there will be more premium lumber.

A large majority of the newer lumber used in home construction comes from trees about 6 inches in diameter. Now you're probably wondering how can they cut a 2 x 8 piece of lumber out of a 6 inch tree. Of course they cannot, the larger lumber comes from larger trees.

Most 2 x 4's that are less than 8 foot long can be cut from these trees. This scrap or waste that comes from cutting these two by fours will now go into engineered building materials like particleboard, oriented strand board and engineered beams. Another name for an engineered been would be a paralam.

I hope you're starting to get the picture now when it comes to using new or old lumber. There are companies that are going into old logging rivers and retrieving old growth lumber. These were logs that sank to the bottom of the river's and were never retrieved because it was too costly.

The old growth lumber is quite expensive. Who's to say what problems we will happen in the future from the newer products created with modern day technology. When it comes to building houses it is not an exact science and as contractors we have been repairing the damage from poor engineering for years.

When I use the word poor engineering I am not pointing fingers at engineers. We now have more knowledge about home construction then we had years ago.

New versus old lumber, who wins the battle. Only time will tell.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more building and Remodeling Library and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Visit us and get more information on building and remodeling your homes and Structural Repairs.

2 X 6 Bathroom Wall

Hiring a Contractor For Bathroom Remodeling - Remodeling Contractors

Well here's the age old question, how do we go about finding a decent bathroom remodeling contractor.

Here's some things you will be looking for in a contractor.

1. Is Your Contractor Fair and Honest?

2. Does Your Contractor Have Experience Remodeling and Designing Bathrooms?

3. Can You Actually Find a Contractor Who Will Complete the Job in a Timely Manner?

4. Do You Think the Workers Will Be Able to Clean the Job up Daily?

5. Will the Contractor Show up on Time?

6. Is the Contractor Going to Work At Least Eight Hours a Day?

7. Does the Contractor's Crew Have Experience?

8. Is Your Contractor and His Crew Courteous?

If you find a contractor for your bathroom remodeling project that has answered yes to all questions above, hire that person immediately. Most contractors can sincerely answer yes to half of the questions above. If you're looking for the ultimate bathroom remodeling contractor, you could be searching for quite a while, you're looking for some one that is competent and you feel comfortable with.

When hiring a contractor, look for someone who has your interest in mind first and not theirs. Find someone who is willing to help with the designed process of your bathroom and the remodeling. If you find a contractor to be arrogant or controlling, there is a good chance, your bathroom might not turn out the way you envision it.

When hiring a contractor for your bathroom remodeling project or any home improvement project, the most important thing to keep in mind is, whether or not you feel comfortable with this person or not. Never hire a contractor you're not comfortable with.

If a contractor is referred to you by someone you trust, this does not guarantee you will be happy with the bathroom remodel. Most referrals that I have gotten over the years are like rolling the dice, I believe I would have done just as good picking a name out of a hat.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more building stairs and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Interior Roof Shaped Ceiling

Tips For Dealing With a Manufactured Home Builder

If you are considering buying a prefabricated or manufactured home then you will be dealing with a manufactured home builder. They are much easier to deal with then your average building contractor is, but all the same you will want to get the best deal that you can get.

A Lot of Design and Decorating Choices to Make

One quandary that you will face is the astounding number of choices and options that you will encounter prior to your home being built. It's just not like it used to be, because todays manufactured home builders are all out to offer more then the next guy in design and decorating options.

Take Your Time and Study Your Options

The secret to making the right decisions is to first get yourself acquainted with the information. Also, do your absolute best to avoid any snap decisions that you may regret later.

Choices in Fireplaces

For instance, you will be offered any number of choices in custom fireplaces and mantels. If you have never owned a home with a fireplace then you must take into consideration whether you want a gas or wood fireplace, so give it some thought beforehand.

Take a Virtual Three Dimensional Tour

Another new marketing trend for todays manufactured home builder is three dimensional computer software that allows a prospective client to actually take a virtual tour of their home before it is even built. It's a great tool for helping a buyer to make the right choices when selecting out their options.

Study Up and Ask Questions

So study the process well and don't be afraid to ask some questions. Can they install speakers in each room of the home your are considering buying? Also, what types of security features can you get with the manufactured home that you are considering buying?

Written by Jayden Jefferson. Come visit my website for more info on modern modular homes as well as modular manufactured homes.

Flooring Books

Natural Stone Fireplaces - Discover the Advantages and Disadvantages of Natural Stone For Fireplaces

Natural stone fireplaces are extremely popular among many home owners. If you are looking to add beauty to your home, without the use of heavy types of stones and materials, natural stone is a wonderful choice. This particular type of rock is also referred to as "thinstone". This is a type of veneer that is cut to ensure quality, yet is extremely lightweight. Many fireplaces have been created using this particular type of material. This is mainly due to the fact that the stone is highly versatile when it comes to color and texture and that it can hold up to a large amount of various conditions as it is so durable. Here, you will be introduced to this building material, as well as some advantages and disadvantages associated with using it.

Advantages of Natural Stone

Many advantages have been associated with stone that is natural. One of the first advantages is that is it suitable to any budget. Being that it is cut relatively thin, this makes an affordable choice for those that have a specific budget outlined for their home improvement and home repair endeavors. The next advantage is that it is lightweight, so it is quite easy to install the pieces with little to no effort. As mentioned previously, there are many different colors and textures available when it comes to selecting thinstone for the home. This product gives the overall appearance of real stone, yet the flexibility of manufactured stone. This is why many homeowners elect to use this for their home improvement projects.

Disadvantages of Natural Stone

When researching any type of building material for the home, it is always a good idea to ensure that you not only research the advantages of using the product, but the disadvantages as well. There are a few points that may be identified as a disadvantage to using natural stone in and around the home. These are as follows:

1. This is a natural manufactured stone. Many individuals prefer to stay away from stone types that are created. If you are looking for a product that is created from rocks obtained naturally, this may not be an ideal choice for you.

2. There is a possibility that the product may experience chipping and scratching. While this is basically a disadvantage, there is a positive side. If chipping or scratching occurs, the stone is created in such a manner that the under surface is the same as the outer surface. This means that it will blend in appropriately.

3. Individuals who use this type of stone may feel that it is not as durable as stones obtained naturally. However, it does have a high tolerance for extreme conditions.

Where to Find Other Natural Stone Fireplace Ideas

If you want to find more natural stone fireplace ideas, there are many different places where you can do so. The internet is loaded with unique designs and ideas for the home. Furthermore, home improvement stores such as Lowe's and Home Depot often carry a large assortment of books on the subject. If you want to get started on integrating a fireplace into your home, a natural stone fireplace may be the best choice for you!

Looking for a supplier of natural stones for stone fireplaces? View the many different styles of Natural Thin Stone for stone fireplaces that Halquist Stone has to offer. For more information, call (262) 246-9000 or visit halquiststone.com to request a free brochure.

Simple Guide to Home Remodeling and Additions

There are two possible reasons if you are planning for home remodeling and additions: the first one is to beautify your house and provide it with more aesthetic appeal and to make it more comfortable as a place for living and the second one is to improve and develop the house to make it new again for reselling purposes. Whatever the reason is, what is important is that steps are properly taken to ensure a quality home remodeling and additions. Here is a guide to a better home remodeling and additions:

1. The first thing to consider is financial resources because embarking on home remodeling and additions requires a considerable amount of money. If you are planning to borrow money or mortgage your house, then think not just twice but think decisively and thoroughly. If the reason for the remodeling and additions is only for aesthetics and not for resale, then it would be better not to pursue with the idea and wait until you have the right finances for the project.

2. Consider what would be the reason for the home remodeling and additions. If you want the house to be resold, then remodeling and additions must be based not on what you need or what you want your house to appear but on what other people need, think and consider as tasteful. Before doing the remodeling and additions project, check what is the latest styles and designs in the neighborhood. You would want your remodeled house to fit the taste and style of your potential buyers.

3. Though it would be cheaper if you personally undertake the home remodeling and addition, it is not advisable. It is advisable to hire a general contractor because he is equipped with the right knowledge and skills in accomplishing your plan. This is not just an easy job because there are codes or rules within your city or area that govern remodeling and addition. Aside from that, there are things to consider, like if the wall or part of the house that is removed is weight bearing. You do not want to have a finished or remodeled house that is structurally problematic.

4. As much as possible, make a design that is consistent with the home's original design and the houses in your neighborhood. Too much of a home remodeling and addition does not provide good impression and does not give the best return. If possible, use similar or complementing materials and with regard to color and dcor, make it as simple as possible because if you are planning to sell it and you choose bold and eccentric color, chances are only few will appreciate and will plan to buy it.

These are only few tips to guide your way through a home remodeling and addition. Instead of buying a new home, which is quite expensive nowadays, you can just remodel your house and have a style that will fit to your new tastes and preferences. Here, you can spend money and you do not have to go through the stress and hassles of buying a new home.

Katie Appleby is an accomplished niche website developer and author.

To learn more about home remodeling, please visit New Room Additions for current articles and discussions.

Brick Patch Under Window

Shop Around and Save on Home Insurance

What do you like the most about your home - the bright, sun-filled kitchen, the shiny wood floors or the comfortable bedrooms?

Or is it the fact that your home probably makes up maybe the biggest part - of your total net worth?

Either way, you have to protect what you have, using homeowner's insurance.

Although there were reports a few years ago of higher prices and limited availability for homeowners insurance, the market has opened up again, according to J. Robert Hunter, insurance director for the Consumer Federation of America. Premiums are expected to rise by no more than the inflation rate this year, he said.

"The market remains a competitive one where homeowners' insurance shoppers can be selective," said Marshall McKnight, a spokesman for the state Department of Banking and Insurance.

Here are several ways to save on home insurance:

Shop around. While many homeowners believe that all insurance companies charge the same, that's an expensive mistake. Use a service such as ours to compare rate quotes from different companies if YOUR area. To get started, just use the form on the right.
"You can go from one company to another and pay twice as much," said Hunter.

And don't just call an agent and expect him to do the shopping for you, Hunter advised, because agents don't represent all companies and might not get you the best deal.

Insure for "replacement cost" rather than "actual cash value." After all, if your belongings are destroyed, do you want the insurance company to send you enough to buy a new couch - or do you want a $50 check for the actual value of your 11-year-old couch?

Make sure you are covered for at least 80 percent of the cost of replacing your home. If you're not, it could hurt you even if your home does not need to be completely replaced.

Let's say your home would cost $200,000 to replace and you're insured for only $100,000, half of the replacement cost. If you have a $10,000 loss, you would get only half of that amount, or $5,000.

Of course, knowing how much it would cost to replace your home is not always easy. For example, I know how much I paid for my home, and how much I could probably sell it for, but I don't have a clue how much it would cost to rebuild if it burned down.

The state Department of Banking and Insurance and the Insurance Council of New Jersey recommend that homeowners in this situation should consult their insurer, who will be able to estimate the cost of rebuilding based on the size and location of the home.

Think twice before calling your insurance company with small claims for minor home damage. There have been reports of homeowners facing much higher premiums after putting in only two claims. So if it's a loss you can handle, take care of it yourself.

And, in that vein, consider a higher deductible.

"If you're not going to file a small claim, it's no use paying a premium to be covered for an amount you wouldn't file for," Hunter said.

"Every dollar you give to an insurance company, on average you only get back 60 cents," Hunter said. The rest goes to the insurance company's profit and overhead. So if you can self-insure for smaller losses, you should.

About 20 years ago, Hunter raised |the deductibles on both his car and |home policies, and banked the money he saved on premiums in a special account. Over the years, he used that account to pay for about $2,000 to $3,000 in losses, mostly auto-related. He still has $4,000 - money that the insurance company |could have had.

"Nowadays, most insurance companies recommend a deductible of at least $500. If you can afford to raise your deductible to $1,000, you may save as much as 25 percent," according to the Insurance Information Institute, an industry group.

Make sure your home insurance policy includes enough liability insurance, in case someone is injured on your property.

Consider buying your home and auto insurance policies from the same insurer. Some companies will take 5 to 15 percent off your premium if you buy two or more policies from them.

You can get discounts if you install smoke detectors, deadbolt locks or burglar alarms.

Keep your credit history clean. Insurance companies are increasingly checking credit reports to set their rates.

Matt McWilliams is one of the co-founders of HometownQuotes.Com, an online insurance quotes web site. He is originally from Pinebluff, NC and attended Middle Tennessee State University. He is considered an expert in the field of online insurance shopping and finding new ways to help consumers save money on their insurance. For more information visit http://www.hometownquotes.com

Exterior Stair Step Damage

Building Homemade Solar Panels May Be Easier Than You Think

Using solar power for home energy production continues to be a topic of major interest. But the high cost of having solar panels installed is a huge drawback to many homeowners. Today many people are building and installing homemade solar panels for a fraction of what contractors are charging.

The concept of building homemade solar panels remains a mystery to most people. The fact is that solar panels are really rather simple to build and install. Anyone with basic mechanical ability can learn to build and install an efficient solar panel system for home use.

Homeowners have several options available when choosing which type solar panel system to install. Ready made kits are available from a variety of sources, but other options are also available.

By far the most economical solution is building a system using recyclable panels. These panels are available from many different sources, and offer homeowners the choice of building their own system at considerable savings. Each year thousands of recyclable solar panels are thrown away. Construction companies, sign companies, and highway contractors discard thousands of solar panels that can easily be made into an efficient home solar power generating system.

Using only simple hand tools, you can turn these discarded solar panels into a solar power generator for your home. You need not be an electrician or a mechanical engineer to generate electricity for residential use. Recyclable solar panels are also available online at very reasonable prices. Many are sold each year that are in turned made into home power generating systems.

Our dependence on energy produced from fossil fuels and the unstable oil markets have put an added emphasis on using more renewable energy. Solar power is one of our most precious natural energy sources, and also one of the most under used.

Homemade solar panels are an affordable solution to any homeowner who would like to utilize solar power as a viable alternative energy source. It is much easier than you may imagine to build and install homemade solar panels and join the ever growing green energy movement.

Solar power is one of our most precious, yet under used green energy sources. Learn the truth about homemade solar panels at http://www.homemadewindmillreview.com/build-solar-panels

Home Buying Problems

Kitchen Cabinet Basics - What to Know Before You Remodel

If you are considering a "Full Kitchen Remodel" then the first place you will want to start (with regard to material choices) is with your cabinets. Cabinets set the tone for the style and color scheme of your entire kitchen. Answering the questions below will get you on the right track.

Design Styles: The most common design styles these days include Shaker, Modern Contemporary, Traditional, Casual Country and Eclectic. Determining the style will direct you to the wood species that work best.

Door Styles: There are basically three door styles to choose from: Raised Panel, Recessed Panel and Slab. With regard to the raised and recessed doors, you will then need to choose from square, arch or cathedral style.

Types of Wood: Cabinets are made from a multitude of wood species; however the most common these days are (in order of hardness and durability):

Oak, Hickory, Mahogany, Laminates
Maple, Cherry, Birch, Pine
Alder, Poplar

Cabinet Quality: The qualities of cabinets available range from all solid wood construction, partial wood construction with plywood veneer, particle board and veneer and (at the lower end of the spectrum) particle board and photo finish and laminates: Of course the prices range (with all wood construction) from very expensive to very inexpensive (photo finish) or laminate construction. While the old adage "You Get What You Pay For" holds true in most cases, there are a number of ways to reduce your overall cost and still have the quality and look you want. For instance, you can have solid wood fronts and on the exposed ends (doors, drawers and face) and use plywood or particle board on the sides and backs (which are not seen). This can save you thousands of dollars.

Other Cabinet Options: The final choices that are worthy of note are the additional options for your cabinets. These include Lazy Susans, waste basket cabinets, spice racks, wine racks, pull-out trays (instead of fixed shelving) "soft close" drawer hardware, dove-tail drawer or butt-joint drawer construction and (for upper cabinets) crown molding, under mount light molding etc. Glass doors (typically on upper cabinets) also lend a certain 'jene se qua' to the final look.

Cabinet Finishes: Yet another consideration is the finishes available: They are laminates, painted and stained. Regarding stain finishes: You can choose from the standard finishes and (if so inclined) add a "glaze finish" to further accent the wood grain and design of the cabinetry. *** Note: When you choose to add a glaze finish, there will be additional costs and (equally important) additional production time. Glazes can increase your cabinet expense from 6% to 20% and add one to two weeks on to the normal production schedule.

Hardware: The sky is the limit with regard to choices of colors, styles and designs of knob and handles. You can literally spend hours online looking at designs and styles. *** Note: Remember to add this into your cabinet budget from the outset as prices range from $3 or $4 dollars for simple knobs & handles to as much as $20 or more for the more ornate ones! Do you homework and research to find the type you want and the lowest cost producer of same.

In conclusion, remodeling your kitchen can be an exciting and rewarding endeavor and add value to your home. With proper planning, you will get the result you want within the budget you wish to keep. Perform your "due diligence" and you will have a final result for you and your family to enjoy for years to come! Good Luck.

If this article has been helpful and you would like more information on our kitchen remodeling services, please visit our website at http://www.pdremodelingsandiego.com

For a no obligation consultation, simply send us an e-mail at sfrick@pdr-sd.com or call us at (858) 560-0444. We service all of San Diego county and have been in business over 22 years.